Mdd2-250.
The result was not long in coming: Bv5. Sv1.25-3. — Scope of pliers: for terminals https://tonaton.co.ke/s_383-activity-trackers 0.5-6 mm2; Of course, this is not a professional instrument, but rather an amateur one. — Product material: PP alloy steel; But even if you do not have them, then the complete connectors should be enough for initial use. Sv1.25-4. But there are no problems with a knife for cutting wires, it bites the wires without problems. Rv2-6. — Plier size: 210 * 60 * 20mm / 8.27 * 2.36 * 0.79in; Of the pluses, the following can be noted: after crimping, the fixation is reliable, the contact is not lost, the connector on the wire does not hang out; The workmanship of the tool is not bad, except for the unpleasant smell. Sv2-4 Fdd2-250. Unless I would like the stripper’s knives to be sharper, since they rather not only cut the insulation, but also tear it, which is not very good. Fdd1.25-250. In any case, you can definitely train to crimp the terminals on them.
This set should be enough for the first time for a person who is starting to get acquainted with the wiring. In principle, each of the available tools copes with its functions without any problems. Rv2-4. The crimper itself initially emitted an unpleasant chemical smell (most likely from the plastic handles), but it faded over time.
The instrument is supplied in its original factory packaging, which is a blister with a retractable cardboard back wall. Will have to order one soon
But for me, the most interesting thing here was the process of crimping the connectors. Process:
So, there are sponges for crimping connectors on top. BV2. I have no complaints about the workmanship of both the crimper and the connectors. Everything is done more or less decently, there is no flash on the insulators, the metal is processed normally – there are no sharp burrs. You don’t need to buy anything right away. Summing up everything that has been written here, I want to note that I have plenty of insulated connectors of different "caliber", all of them are suitable for crimping with a monitored tool in terms of their parameters. 10.JPG” /> I saw on sale universal crimpers, with interchangeable "matrices" (sponges), which are suitable for both insulated and open terminals. Of course, if I had set a goal, the result would have been achieved, but it is unlikely that the contacts will be subjected to such breaking loads.

Electrician Beginner’s Kit: Crimper 100 Connectors

For greater clarity, here are a couple of terminals from the kit: Sv2-3. For the experiment, I used the first wire I came across and one of the 200 connectors from the package. Rv5.5-5. — Connectors included: 20 specifications (5 pcs each) Rv1-25-4. So you need to expect appropriate results from him.
On the back side of the carton, a crimper is schematically depicted with a description of its capabilities, as well as a wiring diagram. Although this set meets my needs, I can’t say that it met all the expectations placed on it. Rv2-3.
The fixation turned out to be reliable, I tried to pull the connector off the wire – it did not work. On the front side, the package looks like this: If suddenly someone does not know what it is, then a few words about the purpose of this tool: a crimper is an electrical installation tool designed to connect wires to each other https://jiji.com.gh/tv-dvd-equipment/4k-uhd or to connector contacts during electrical work without soldering. Rv1.25-6. The crimper itself (and to be more precise, its working part) looks like this (by the way, in reality it is slightly different from the picture shown on the cardboard – the knife is located not at the tip of the jaws, but closer to the handles) : Bv1.25. Mdd1.25-250. This crimper is universal, in addition to sponges for crimping connectors, it contains the following tools: the so-called "bolt cutter", a coaxial crimp, a wire knife and then a stripper for stripping. Since there are color markings on the crimper, there are no problems with the selection of the desired “seat” in the jaws. In today’s review, I want to share with you my impressions of a set consisting of a crimper and hundreds of connectors, which I purchased on eBay. Rv2-5. Rv5.5-6.
So, if you believe what is indicated on the product page, then this crimper has the following characteristics: Of the obvious disadvantages: firstly, due to the narrow "sponge" and the crimping area is narrow; secondly, this crimper cannot be used to crimp open (non-insulated) contacts. The quality of the crimp and the area are clearly visible in the photo attached above …
Dimensions are present on each terminal, applied by stamping. The corresponding sections are marked in color: red 22-18 AWG (American wire marking system in which a thicker wire corresponds to a smaller numerical value) (or 0.5-1.5 square millimeters, current up to 10A), blue 16-14 (1.5 -2.5 square millimeters, current up to 15A), yellow 12-10 (4-6 square millimeters, current up to 24A). Rv1.25-5.